Front View
Rear View
8dBi 500m Wireless Network Bridge, Dual 10/100 LAN Ports
57MM-WB03
Ruijie No. RG-EST100-E
Product Summary
The 57MM-WB03 is an IEEE 802.11b/g/n 8dBi wireless bridge for data, video surveillance backhaul or remote wireless transmissions. Applications include farms and rural property, tower cranes, factories, campuses and construction sites where you must create a wireless link for data connectivity with minimal installation time and configuration. Featuring dual LAN ports, the WB03 is perfect for connecting directly to local cameras or WiFi access points and can support up to 10 times 3MP cameras loading at 100m or 5 times 3MP cameras loading at 500m.
View More Networking and Data
Features and Benefits
- Featuring 2 x 10/100 RJ45 ports for direct-to-device connection for access points or cameras.
- 2.4GHz single-band dual-stream chip with transmit power ≤100 mW (20 dBm) (adjustable)
- PTMP supported bridging (i.e. one master to multiple slaves)
- IP55 Weatherproof, -30~60℃ for guaranteed stable operation in outdoor or elevator environments, etc.
- Power via 12 VDC power supply or 12 VDC passive PoE
- One-click set-up and management via the free cloud app.
Specifications
| Hardware Specifications | |
|---|---|
| Radio Design | 2 GHz Single-Band Dual-Stream |
| Transmission Protocol | IEEE 802.11b/g/n |
| Operating Band | 802.11b/g/n: 2.400～2.483GHz |
| Antenna | Directional antennas, 8 dBi |
| Polarization | Horizontal: 70°, Vertical: 70° |
| Bridging Distance | 500m (recommended) |
| Spatial Streams | 2x2, MU-MIMO |
| Memory/Flash | 64 MB/8 MB |
| Maximum Throughput | Up to 300 Mbps at 2.4 GHz |
| Ports | 2 10/100Base-T Ethernet ports, port 1 with Passive PoE |
| Max. Transmit Power | ≤100 mW(20 dBm) (adjustable) |
| IP Rating | IP55 |
| Lightning Protection | ±6 KV(Common Mode) |
| Installation | Wall-mounted/ Pole-mounted |
| Weight | 0.3 kg |
| Dimensions （D x W x H） | 165.5mm×68.7mm×42mm |
| Software Features | |
| Layer 2 Features | |
| Ethernet | LAN Port Working in Bridging Mode |
| VLAN | 802.1Q VLAN |
| L3 Features | |
| IPv4 | ARP, Ping, Traceroute |
| UCAST | Default Route |
| Internet | |
| DHCP Client | Yes |
| Static IP Address | Yes |
| WAN Address Collision Avoidance |
Changing LAN Address Automatically upon WAN Address Collision |
| Device Access | 10.44.77.254 192.168.120.1 10.44.77.254 |
| Routing | |
| Default Route | Yes |
| Management Features | |
| SN Management | Entering SN Importing SN by Excel File |
| Wizard | Project Settings: Project Name, Password and Type |
| MQLink | MQLink |
| Networking Management | Adding Device to Network Based on LNID Set Up New Device (LNID=0) One-to-Many Removing the device from project when the device is reset to factory settings. Restoring LNID to 0 and password to admin when the device is removed from project. Network Migration Device Deletion Discovering neighboring devices automatically and reporting the device whose LNID is 0 or inconsistent with the network LNID. Migrating the device automatically after users enter the password. |
| Basic Settings | AP/CPE Switchover LAN Settings Hostname Settings Password Settings Country/Region Code Settings Time Zone Settings Clock Settings |
| Network Settings | Password Settings IP Address Settings SSID Settings |
| Configuration Synchronization |
Synchronizing configuration when the device is added. After users edit settings on Eweb, MACC will receive the timestamp reported by the device and trigger synchronization. A device goes online after settings are changed. The device will be synchronized with configuration based on its timestamp. Synchronizing configuration among Ruijie Cloud, Eweb and MACC |
| Alarm | |
| Alarm | Default Configuration Notification IP Conflict Networkwide Management SSID Notification WDS Link Exception Alarm Disconnection Alarm |
| Diagnostics | |
| Diagnostics | Network Tools Fault Collection |
| System Tools | |
| Upgrade | Upgrade to Specified Version Upgrade All Devices Local Upgrade |
| Maintenance | System Time Reboot Reset to Factory Settings Web Session Timeout |
| Deployment Tool | Deployment Tool |
| Device List | |
| Device List | Hostname, Type, Client Count, Channel, Online/Offline Status |
| Device Details | |
| Device Retails | Hostname, SN, MAC Address, Management IP Address, Type, Firmware Version |
| Remote SSH | |
| Yes | |
| Remote SSH | |
| Yes | |
| Remote Web | |
| Yes | |
| WDS | |
| WDS Settings | One-click optimization Switching among multiple working modes (high-bandwidth/normal/anti-interference) WDS: SSID Hiding, Not Open AP/CPE Switchover SSID, Channel and Power Settings Bridging Status LED LED off: No bridging One LED blinking: < -78dBm One LED on: -78dBm< RSSI <-72dBm Two LEDs on: -72dBm< RSSI <-65dBm Three LEDs on: RSSI > -65dBm Root AP RSSI: The lowest RSSI shall prevail. Link Quality: High, Medium and Low If the CPE end detects bridging failure and fails to connect again in 5 minutes, it will be rebooted automatically to set up bridging again. Unlocked: Default SSID (Broadcast, Open), @ruijie-bXXXX Locked: Default SSID (Hidden, Open), @ruijie-bXXXX The locked device supports re-pairing on Eweb and can be locked again. AP/CPE supports fetching AP SSID/BSSID list by scanning. Display Recommended Camera Count Multi-VLAN Transparent Transmission |
| Security Features | |
| Basic Features | Login Authentication (password, none) |
| Password Security | Password Security |
| Developer Mode | Developer Mode |
| Application Protocol Features | |
| DNS | DNS client |
| SSH | SSH TFTP Client DHCP-Server DHCP Client CLIENT |
| WLAN Basic Features | |
| Local Forwarding | Local Forwarding Local Association |
| WLAN RF Features | |
| 802.11 Protocol | Country Code Channel Expansion |
| WLAN Encryption and Security | Link Authentication Access Authentication Security (WPA-PSK/WPA2-PSK/WPA-WPA2-PSK) Key Agreement Protocol |
| Bridging Security | Bridging key for the entire network Bridging key for a pair of wireless bridges Bridging key for a wireless bridges |
| WLAN QOS | |
| WLAN QoS/WMM | WMM |
| Storm Control | |
| Multicast/Broadcast Conversion to Unicast |
Multicast/Broadcast Conversion to Unicast (Four-Address) |
| Multicast/Broadcast Rate Increase |
Three-Address Broadcast/Multicast Packet Rate: 11 Mbps |
| Multicast/Broadcast Packet Suppression | Limiting the Rate of DHCP and ARP Broadcast Packets Limiting the Rate of SSDP and mDNS Multicast Packets Limiting the Rate of All Types of Broadcast Packets Limiting the Rate of All Types of Multicast Packets |
| Monitoring | |
| WDS Link Quality | Displaying WDS Link Quality |
| Real Topology | Displaying Real Topology |
| Networking | |
| Self-Organizing Network | Establishing a Self-Organizing Network Between Bridges |
| Hardware Features | |
| Physical Features | |
| LED indicator | LEDs indicate the bridging quality: LED off: No bridging LED blinking: ≤-78dBm One LED on: -78dBm< RSSI ≤-72dBm Two LEDs on: -72dBm< RSSI ≤-65dBm Three LEDs on: >-65dBm |
| Hardware Button | 1 reset button |
| Power Supply | 12 VDC power supply or 12 VDC Passive PoE |
| Power Consumption | < 5W |
| Environment | Operating temperature: -30°C to 60°C (-22°F ~ 140°F) Storage temperature: -40°C to 70°C (-40°F ~ 158°F) Operating humidity: 5% to 95% (noncondensing) Storage humidity: 5% to 95% (noncondensing) |
| MTBF | > 400,000H |
| RSSI | |
| RSSI | –58 dBm/100 meters –68 dBm/500 meters |
| Physical Features | 3M | 14/100 meters 5/500 meters |
4-5M | 6/100 meters 3/500 meters |
6-7M | 3/100 meters 1/500 meters |
Downloads
Product Image Product Image (Back) Brochure Wireless Bridge Installation Guide Ruijie Product Application Guide Full Product CatalogueView and download User Documents and Manuals directly from Ruijie under the 'Resources' tab.