The 57MM-APPI-60 is a PoE++ power inserter capable of supplying up to 60W. This power inserter is perfect for our wireless access points, SOHO switches, IP phones, webcams and PoE cameras, especially PTZ cameras that can be power-hungry. The APPI-60 is IEEE 802.3bt (Type 3) compliant with single input and output RJ45 2.5 Gbps ports supporting ultra high-speed data transfer.
View More Networking and Data
Hardware Specifications | |
---|---|
Dimensions | 137.4 mm x 62.3 mm x 32.6 mm 5.41 in. x 2.45 in. x 1.28 in. ) |
Weight | 225 g (7.94 0z) |
Output Voltage | 56V @ 1.08A |
Gigabit LAN Port | 2.5G |
Remote Reset Capability | No |
Reset Button | No |
Rated Voltage | 100 240V AC @ 50/60Hz |
Input Current | 1.5A@120VAC, 1.2A@240VAC |
Inrush Current | <60A Peak @ 120VAC, <120A Peak @ 230VAC |
Average active efficiency | 90.32% |
Efficiency at low load (10%) |
83.44% |
No load power consumption |
0.130W |
Output Ripple | ≤1% |
Switching Frequency | 65KHz |
Line Regulation | ≤ 5 |
Load Regulation | ≤ 5 |
2 Pair Powering | - |
4 Pair Powering | Pins 1, 2, 4, 5 (+) and Pins 3, 6, 7, 8 |
Operating Temperature | 0 to 40° C (32 to 104° F) |
Storage Temperature | -30 to 70°C ( 22 to 158° F) |
Operating Humidity | 35 to 95% Noncondensing |
AC Connector | 3 pole appliance inlet type C6 |
Data IN / POE | RJ45 Shielded Socket |
Surge Protection | Difference and Common Mode |
Clamping Protection | 65V Power |
Max. Surge Discharge | 500A(8/20us)power |
Peak Pulse Current | 36 A (10/1000us)Data |
Shunt Capacitance | <5 pF data |
Response Time | <1 ns |
Certifications | CE, FCC, CCC |
Warning | Operation of this equipment in a residential environment could cause radio interference. |
View and download User Documents and Manuals directly from Ruijie under the 'Resources' tab.