56MM-E500-200 is a 200m high quality .500" (half-inch) 50 Ohm corrugated, low loss coaxial feeder cable for cellular antenna and radio systems. Suited for use with Matchmaster's outdoor and indoor cellular and communications antennas where cable runs are longer than 30m from the antenna to the receiver or between devices.
View More Cellular and 2-Way Radio
Construction | ||
---|---|---|
Inner Conductor | Material | Copper clad aluminum wire |
Diameter, mm | 4.80 ± 0.05 | |
Insulation | Material | Physically foamed PE |
Diameter, mm | 12.20 ± 0.30 | |
Outer Conductor | Material | Ring corrugated copper |
Diameter, mm | 13.80 ± 0.20 | |
Jacket | Material | PE or fire-retardant PE |
Diameter, mm | 15.80 ± 0.20 | |
Mechanical Properties | ||
Bending Radius | Single | 70mm |
Repeated | 125mm | |
Moving | 350mm | |
Pulling Strength | 1130N | |
Crush Resistance | 2.0kg/mm | |
Recommended temperature | Store | -70~+85℃ |
Installation | -40~+60℃ | |
Operation | -55~+85℃ | |
Electrical Properties | ||
Inner conductor DC Resistance | 1.60Ω/km | |
Outer conductor DC Resistance | 2.10Ω/km | |
Impedance | 50±1Ω | |
Capacitance | 75.8PF/m | |
Inductance | 0.19μH/m | |
Propagation Velocity | 88% | |
DC breakdown Voltage | 4.0kV | |
Insulation Resistance | >5×103M Ω• km | |
Peak Power | 40kW | |
Screening Attenuation | >>120dB | |
Cut-o° Frequency | 8.8 GHz | |
Attenuation and Average Power | ||
Frequency MHz | Nom. attenuation @20 ℃, dB/100m | Power rate @20 ℃, kW |
10 | 0.67 | 11.30 |
100 | 2.17 | 13.49 |
200 | 3.10 | 2.44 |
450 | 4.75 | 1.59 |
800 | 6.46 | 1.17 |
900 | 6.85 | 1.10 |
1000 | 7.28 | 1.04 |
1500 | 9.09 | 0.833 |
1800 | 10.10 | 00.753 |
2000 | 10.70 | 0.710 |
2300 | 11.50 | 0.627 |
3000 | 13.40 | 0.565 |
Maximum attenuation value shall be 105% of the nominal attenuation value | ||
VSWR | ||
806~960MHz | ≤1.15 | |
1700~2200MHz | ≤1.15 | |
5~3000MHz | ≤1.25 | |
Weight | ||
Gross Weight | 138.5 kgs | |
Net Weight | 112.5 kgs |