High quality 10mm 50 ohms LMR400/LL400 Low Loss Coaxial Cable for cellular antenna systems. Suited for use with our 4G01 and 4G02 antenna kits where cable runs are longer than 6m from the antenna to the receiver.
View More Cellular and 2-Way Radio
Inner: 1 reel of 305 metres
Construction | |||||
---|---|---|---|---|---|
Material | Construction | OD | |||
Centre Conductor | Solid copper Clad Aluminium | 1/2.74mm | 2.74mm | ||
Insulation:(Dielectric) | Gas Injected Foamed Polyethelene | Solid | 7.24mm | ||
Shield 1 | Bonded Aluminium tape | Aluminium/polyester/aluminium | 7.39mm | ||
Shield 2 | Annealed Tinned Copper Wire Braid | 8/24/0.16mm | 8.13mm | ||
Jacket (Sheath) | Non Contaminating PVC | Extruded | 10.29mm | ||
Flexibility | Plasticiser | 65p | |||
Mechanical Characteristics | |||||
Cable weight (incl spool) | 13.3kgs/100m | ||||
Max Recommended pulling tension | 72.7kg | ||||
Minimum Band Radius | 25.4mm | ||||
Operating Temperture | -40° to +80°C | ||||
Electrical Characteristics | |||||
Attenuation | |||||
Capacitance | 78.4pF/M | Frequency (MHZ) | dB/100m | Avg. Power Watts | |
Impedance | 50 ± 1 ΩNom | 30 | 2.29 | 3300 | |
Velocity of propagation | 85% | 50 | 2.89 | 2600 | |
Conductor DCR | 4.60 Ohms/km | 150 | 4.95 | 1500 | |
Shield DCR | 5.40 Ohms/km | 220 | 6.14 | 1200 | |
Nom. Inductance | 0.20 uH/m | 450 | 8.60 | 830 | |
Peak Power | 16kW | 900 | 12.83 | 580 | |
Nominal Delay | 5.05ns/mtr | 1500 | 16.86 | 440 | |
Maximum Operating Voltage | 2500 v RMS | 1800 | 18.57 | 400 | |
Cut off Frequency | 16.2GHz | 2000 | 19.65 | 370 | |
Return Loss (820-960MHz) | ≥20 dB | 2500 | 22.28 | 330 | |
Return Loss (17000-2200MHz) | ≥20 dB |