10MM-MD34 - Power Passing Masthead Amplifier VHF/UHF 34dB with 4G/5G Filter
Front View
10MM-MD34 - Power Passing Masthead Amplifier VHF/UHF 34dB with 4G/5G Filter Back of Product Image
Rear View
10MM-MD34 - Power Passing Masthead Amplifier VHF/UHF 34dB with 4G/5G Filter Packaging Image
Packaging

Power Passing Masthead Amplifier VHF/UHF 34dB with 4G/5G Filter

10MM-MD34

Product Badge

Product Summary

The MD34 is a 4G/5G filtered wide band VHF/UHF amplifier suitable for use in all capital cities and regions with broadcast up to 694MHz. Featuring Power passing via VHF or UHF to line power additional amplifiers upstream. Featuring filtering from 694MHz to deliver greater than 50dB filtering at 750MHz for 4G and 5G LTE signals.
View More Amplifiers and Modulators

Features and Benefits

  • Built-in 4G/5G LTE 694MHz low pass filter with >40dB rejection @ 750MHz for UHF and >50dB rejection for VHF at maximum gain
  • Power through switch to drive extra amplifiers for both VHF and UHF with gain adjustment switch selectable between 15, 25 and 34dB for UHF and 10, 20 and 28dB for VHF
  • Heavy-duty UV stable outdoor weather proof casing
  • Can be used with VHF or UHF antenna’s or a combination of both
  • VHF input return loss is >12dB with a noise figure of <4.8dB and UHF input return loss is >11dB with a noise figure of <2.9dB

Find a Stockist Now


Pack Quantity

Inner: 1 hang sell box of 1 piece
Outer: 1 carton of 20 hang sell boxes (20 pieces)
Bulk: 1 carton of 2 cartons (40 pieces)

Specifications

Amplifier
Input 1 VHF
Input 2 UHF or VHF+UHF
VHF frequency range 174-230MHz
VHF gain switchable 10/20/28dB
UHF frequency range 520-694MHz
UHF gain switchable 15/25/34dB
Input model switchable Mode 1 Mode 2
VHF In No signal VHF
UHF/V+U In VHF+UHF UHF
Output Output to System (14VDC Input)
Return loss >12dB typical
Output >102dBuV
Noise figure <=5dB
Impedance 75 Ohm
Power consumption 100mA
All "F" female connectors
Alloy diecast housing dimension 93 x 66 x 21.5mm
Waterproof ABS plastic housing dimension 123 x 108 x 50mm
  • This field is for validation purposes and should be left unchanged.

You may also need