Front View
WISI Optopus EDFA Module 1x21dBm
20MM-LX30S2101
Fibre Optics
Matchmaster provide an extensive range of IP and fibre solutions for RF overlay and distribution. Simple IP solution using SAP protocol without the need for middleware through to advanced hospitality solutions. Simple fibre solutions for CATV and L-band in 1310nm and 1550nm wavelengths including DWDM solutions for 5 wire over single fibre distribution.
View More Fibre Optics
Features and Benefits
- Optical amplifier for use in WISI Chassis LX50
- 1x21dBm output SCAPC with adjustable power
- Amplification of optical signals in the C-band
- Optical test port for the output signal
- Wide input power range enables application as a booster or in-line amplifier.
- Low electrical power consumption
Pack Quantity
Inner: 1 box of 1 piece
Helpful Tip: Bulk cartons prevent potential transit damage.
Specifications
| Amplifier inputs | 1 pcs. |
|---|---|
| Optical input power | -2...+10 dBm |
| Amplifier outputs | 1 pcs. |
| Optical output power | 1x 21,0 dBm |
| Output level tolerance | ±0,5 dB (Variation of output power over polarization, wavelength range and temperature range) |
| Output level variation | ±0,5 dB |
| Wavelength | 1530...1565 nm |
| Setting range amplifier | 5 dB (0,1 dB-steps) |
| Noise figure | ≤5,5 dB (at 0 dBm input power, nominal output power and signal wave length 1550 nm) |
| Return loss | ≥45 dB (input - output) |
| Isolation | ≥40 dB (output - input) |
| Optical test point output | -2.5 dB (in relation to EDFA-output power) |
| Connectors | |
| SC/APC connectors | 1 pcs. |
| General data | |
| Power consumption | max. 22 W |
| Dimensions (WxHxD) | 30 x 133 x 320 mm |
| Environmental parameters | -5...+45 °C (ETSI EN 300 019-1-3 Class 3.1) |