Front View
Rear View
Application
Rubber Roof Seal Black (0-35mm) (10 Pack)
11MM-RB01
Product Summary
The RB01 is a premium quality EPDM rubber roof seal designed for cable and conduit roof penetrations. The RB01 features a durable aluminium foot moulded into the base, allowing you to easily form to multiple roof profiles and allows self-tapping screws to be used to fasten the seal into place where needed. The black EPDM is UV, and high temperature rated, lead-free and highly durable, making it the right choice for use in the harsh Australian environment.
View More Roof Seals and Penetrations
Features and Benefits
- Roof seal for penetration size: 0-35mm
- Made from durable black UV rated EPDM rubber
- Integrated heavy-duty aluminium base for moulding to match roof profile for the ultimate seal
- Cut at the required diameter to form a perfect seal around your conduit, pole or cables
- Can be screwed down to surfaces to fix in place permanently
- Designed for use in Australia's harsh heat and high UV environments
- Independent UV and stress tested to standard ASTM D412 and ASTM D624
Specifications
| Tensile Properties | |||
|---|---|---|---|
| Before UV Exposure Test Results | |||
| Method | Tensile Strength at Break | Elongation at Break | Results |
| ASTM D412 | 8.09MPa Average | 330% Average | Complies |
| After 2000hrs UV Exposure | |||
| Method | Tensile Strength at Break | Elongation at Break | Results |
| ASTM D412 | 8.09MPa Average | 330% Average | Complies |
| Tear Resistance | |||
|---|---|---|---|
| Method | Maximum Force | Maximum Force / Thickness | Results |
| ASTM D624 | 56 Newton Median | 29.0 N/mm | Complies |
| Flammability of Rubber | |||
|---|---|---|---|
| Method | Test | Conditioning | Results |
| UL 94 | One | 23±2°C and 50±10% Relative Humidity for 48 hours | Complies |
| UL 94 | Two | 70±2°C for 168 hours | Complies |
| Ozone Resistance of Rubber | |||
|---|---|---|---|
| Method | Conditions | Observed Outcome | Results |
| ASTM D1149 Method A | 72 hours at 40°C (107°F) and 50 pphm Ozone | No cracking observed | Complies |
| UV Resistance of Rubber | |||
|---|---|---|---|
| Method | Conditions | Requirements | Results |
| ASTM G154 | 8 hours UV at 60°C (0.89W/m2.nm irradiance), 4 hours condensation at 50°C | Max 50% loss in Tensile Strength and Elongation | Complies |